Sony XR-C850RDS - Manual (Page 16)

16
EN
With Optional Equipment
CD/MD Changer
If you connect an optional CD changer with
the CD-TEXT function, the CD-TEXT
information will appear in the display when
you playback a CD-TEXT disc.
Playing a CD or MD
1
Press (SOURCE) repeatedly to select the
CD or MD.
2
Press (MODE) until the desired changer
indication appears in the display.
CD/MD playback starts.
Changing the displayed item
Each time you press (DSPL) during CD, CD-
TEXT or MD playback, the item changes as
follows:
$
Elapsed playback time
$
Disc name
∗
1 /Artist name
∗
2
$
Track name
∗
3
$
Clock
∗
1 If you have not labeled the CD or there is no disc name
prerecorded on the MD, “NO D. Name” appears in the
display.
∗
2 If you play a CD-TEXT disc, the artist name appears in
the display after the disc name. (Only for CD-TEXT
discs with the artist name)
∗
3 If the track name of a CD-TEXT disc or MD is not
prerecorded, “NO T. Name” appears in the display.
You can label a personalized name for CDs
and CD-TEXT discs with the disc memo
function, refer to “Labeling a CD” (page 19).
Tip
If the name of the CD-TEXT disc or MD is too long, you
can scroll it across the display by pressing (SHIFT), then
(1) (N).
Automatically scrolling a disc name
— Auto Scroll
If the disc name/artist name or track name on
a CD-TEXT or MD disc exceeds 10 characters
and the Auto Scroll function is on,
automatically scrolls on the display as follows.
•
The disc name appears when the disc has changed (if the
disc name is selected).
•
The track name appears when the track has changed (if
the track name is selected).
•
The disc or track name appears depending on the setting
when you press (SOURCE) to select an MD or CD-
TEXT disc.
SEEK/AMS
To locate succeeding tracks
To locate preceding tracks
SEEK/AMS
To search forward
To search backward
If you press (DSPL) to change the display
item, the disc or track name of the MD or CD-
TEXT disc is scrolled automatically whether
you set the function on or off.
1
Press (SHIFT), then press (2) (SET UP)
repeatedly until “A. Scrl” appears.
2
Press (4) (n) to select “A. Scrl on.”
3
Press (SHIFT).
To cancel Auto Scroll, select “A. Scrl off” in
step 2 above.
Note
For some CD-TEXT discs with extremely many characters,
the following cases may happen:
- Some of the characters are not displayed.
- Auto Scroll does not work.
Displaying the recording date of
the currently selected MD
Press (DSPL) for two seconds during MD
playback.
The recording date of the track is displayed
for about three seconds.
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) once for each track you wish
to skip.
Locating a specific point in a track
— Manual Search
During playback, press and hold either
side of (SEEK/AMS). Release the button
when you have found the desired point.
Locating a disc by disc number
— Direct Disc Selection
Press the number button that
corresponds with the desired disc
number.
The desired disc in the currently selected
changer begins playback.