Sennheiser 502011 - Manual (Page 16)

13
Putting the Set 840 S system into operation
Connecting headphones
̈ Connect the 3.5 mm jack plug of the headphones to the
socket
5 of the receiver.
Wearing the receiver
In order to wear the receiver, you can use the supplied
lanyard
Q , the clip P or the supplied induction loop R .
The induction loop is suitable for users of hearing aids, the
lanyard and the clip are useful if you are using headphones.
Wearing the receiver around the neck
If you want to wear the receiver around your neck, use
• the supplied lanyard Q or
• the connected induction loop R (where applies).
To attach the lanyard Q :
̈ Connect the fasteners of the
lanyard
Q to the metal ring
at the rear of the receiver.
̈ Wear the receiver around your
neck, with the Sennheiser logo
facing away from your body.
5
Q