Sony Ericsson S700i - Manual (Page 28)

This is the Internet version of the user's guide. © Print only for private use. 28
Calling
3 Say “Busy”, or another word } Yes .
4 Instructions appear. } Continue and select
the environments in which you want voice
answering to be activated.
To Answer or Reject a Call Using
Voice Commands
• When the phone rings, say “Answer” and the call
is connected.
• When the phone rings, say “Busy” and the call
is rejected. The caller is forwarded to voicemail
(if activated) or hears a busy tone.
Editing Your Voice Commands
Keep all your voice commands up to date by
rerecording them or deleting the ones not used.
You can also edit a voice command for a phone
number in the phonebook. Select the contact to edit
a voice command for
} More } View & Edit . Scroll
to the relevant tab and edit your voice command.
To Rerecord a Voice Command
} Settings } the General tab } Voice Control
} Voice Dialing } Edit Names . Select a voice
command } More } Replace Voice . Lift the phone
to your ear, wait for the tone and say the command.
Tips When Recording and Using
Voice Commands
If your phone cannot detect your voice command,
one of the following might have happened:
• You spoke too softly – try speaking louder.
• You held the phone too far away – hold it as you
do during a call.
• The voice command was too short – it should be
about one second long and more than one syllable.
• You spoke too late or too soon – speak immediately
after the tone.
• You did not record the voice command when the
handsfree was attached – attach the handsfree and
then record.
• You used another intonation – use the same
intonation as the recorded voice command.
Forwarding Calls
If you cannot answer incoming calls, you can forward
them to another number, for example, your answering
service.
Select from the following forward options:
•
Always Forward – forward all calls.
• When Busy – forward calls if you are already
on the phone.
When the Restrict calls function is activated, some
Forward calls options are not available.