Sony XB88AV - Manual (Page 27)

27
Recording CDs by
specifying the
track order
— Program Edit
You can record tracks from all the CDs in the
order you want. When programming, make
sure the playing times for each side do not
exceed the length of one side of the tape.
1
Place CDs and close the front cover.
2
Insert a blank tape into deck B.
3
Press FUNCTION repeatedly until
“CD” appears in the display.
4
Press PLAY MODE repeatedly until
“PROGRAM” appears in the
display.
5
Press DISC SKIP to select a CD.
6
Turn the jog dial until the desired
track appears in the display.
7
Press PLAY MODE once.
The track is programmed. “STEP” and
the programmed playing order appear,
followed by the total playing time.
8
Repeat steps 5 through 7 to program
additional tracks to be recorded on
side A.
Skip step 5 to select tracks from the same
disc.
9
Press P to insert a pause at the end
of side A.
“P” appears in the display and the total
playing time resets to “0.00” in the
display.
continued
3 12 2 1113
5 4,7 6 1
p
CHECK
9
p
EDIT
Track number Disc number
DISC PROGRAM
DOLBY NR
OFF
Total playing time
(including selected track)
Total playing time
The last programmed track
DISC PROGRAM
DOLBY NR
OFF