Sierra Wireless MP215 - Manual (Page 25)

MP215 Mobile Modem Installation, Configuration, and User’s Guide
PN 2110036 Revision 1.0 05/11/99 5-3
5.3. Programming the Dial Code
Click on setup beside the Dial Code window. A window similar to the one above
will appear. Enter in the 1800 number and system ID as provided by your
CS-CDPD service provider, and click OK.
5.4. CDPD provisioning
NEI and Side Preference
The MP215’s NEI (IP address) and Channel Side preference are configured via
the following Wireless Expert screen:
To provision the NEI, click on the Setup button, and the following window shown
below will appear. Enter the IP address, as provided by your CDPD service
provider, and click OK.
To provision the side preference, determine from your carrier which channel side
preference is required and use the drop down menu to select the correct
preference.