Editing recorded mds 43 – Sony MDS-W1 User Manual
Page 43
Editing Recorded MDs
43
EN
2
Turn AMS to select “DiscnDisc”, then press
AMS or YES.
3
Turn AMS to select “1Tr Move”, then press AMS
or YES.
4
Turn AMS to select the track to be moved and
press AMS or YES.
The moved track begins playing back.
While moving a track, the deck performs high-
speed playback and the volume may fall or the
sound may drop out. However, this is not a
problem.
Moving a track takes approximately 1/4 of the
playing time of the track to be moved.
When the deck finishes moving a track,
“Complete
” appears for a few seconds.
To cancel the 1Tr Move Function
Press MENU/NO or p before Step 4.
Notes
• Once you have moved a track using the 1Tr Move
Function, you cannot return to the previous condition
even if you use the Undo Function on page 41.
• If “
Impossible” appears in the display, the track
cannot be moved. This sometimes happens when you’ve
edited the same track many times, and is due to a
technical limitation of the MD system, not a mechanical
error.
• If you move a short track, a slight portion at the end of the
track may disappear.
Copying a track or disc title between two
MDs (Name Copy Function)
You can copy a track or the disc title of the MD in deck
A to use it as a title of another track or the disc title of
the MD in deck B. You can also copy a track or the disc
title from deck B to deck A.
1
While the deck is stopped, press MENU/NO on
deck A to display EDIT menu.
To copy a track title or the disc title from deck B to
deck A, press MENU/NO on deck B.
2
Turn AMS to select “DiscnDisc”, then press
AMS or YES.
3
Turn AMS to select “Name Copy”, then press
AMS or YES.
4
Turn AMS to select “Disc” to copy the disc title, or
the track whose title you want to copy.
If “
No Name!!” appears in the display
The disc or the track has no name.
5
Turn AMS to select “Disc” for disc title or to
specify the track number to copy a title.
6
Press AMS or YES.
“Complete
” appears for a few seconds to
indicate that the copying operation is completed.
If “Name Over Write??” appears in the display
The disc or track you selected already has a title. If
you continue the title copying, press AMS or YES.
To cancel the Name Copy Function
Press MENU/NO or p before Step 6.
Note
Once you have copied a track or the disc title between two
MDs using the Name Copy Function, you cannot return to
the previous condition even if you use the Undo Function on
page 41.
≠
AMS
±
p
0
)
r
·
§
EJECT
P
§
EJECT
≠
AMS
±
p
0
)
r
·
P
≠ AMS ±
MENU/NO
MENU/NO
YES
YES