beautypg.com

Volume control, Speaker connection, Using other subwoofer – Sony XL-HF200P(BK) User Manual

Page 5: Connecting a tv, etc, System connections (continued)

background image

E-4

System connections (continued)

Speaker connection

Connect the black wire to the minus (–) terminal,
and the red wire to the plus (+) terminal.
Use speakers with an impedance of 4 ohms or
more, as lower impedance speakers can damage
the unit.
Do not make a mistake when connecting the right
and left speakers. The right speaker is the one on
the right side when you face the unit.
Do not let the bare speaker wires touch each other.
Do not allow any objects to fall into or to be placed in the bass refl ex
ducts.
Do not stand or sit on the speakers. You may be injured.

Volume control

The sound level at a given volume setting depends on speaker effi ciency,
location, and various other factors. It is advisable to avoid exposure to high
volume levels. Do not turn the volume on to full at switch on. Listen to music at
moderate levels. Excessive sound pressure from earphones and headphones
can cause hearing loss.

Incorrect

AC outlet (AC 120 V ~ 60 Hz)

Installing the AM loop antenna

< Attaching
to the wall >

< Assembling >

wall

screws (not supplied)

AM loop
antenna

Right

speaker

FM antenna

Video cable
(not supplied)

To video input jack

Left
speaker

Red
Black

Make sure to unplug the AC power cord before making any connections.

Using other subwoofer

You can connect a subwoofer with an amplifi er to the SUBWOOFER PRE
OUT jack.

Commercially available subwoofer

(amplifi er built in)

Audio cable
(commercially
available)

Audio signal

To audio
input jack

To SUBWOOFER
PRE OUT jack

Main unit

Notes:

No sound is heard from the subwoofer without a built-in amplifi er.
Subwoofer Pre-out (audio signal): 200mV / 10k ohms at 70 Hz.

Connecting a TV, etc.

Connect to the TV using an audio cable.

TV

To audio
output jack

Audio cable
(commercially
available)

A

udio signal

To LINE input
jack

Main unit

To select Line In function:

On main unit: Press FUNCTION button repeatedly until Line In is

displayed.

On remote control: Press AUDIO/LINE (INPUT) button repeatedly until

Line In is displayed.

XL-HF200P_USA_EN.indd 4

XL-HF200P_USA_EN.indd 4

7/16/2010 9:11:00 AM

7/16/2010 9:11:00 AM