Sony BRAVIA KS-60R200A - Manual (Page 45)

45 GB
A
d
d
iti
on
a
l I
n
fo
rm
a
tio
n
Picture flashes initially when
changing to HDMI mode or
when switching on the TV in
HDMI mode • This is probably caused by the authentication process between HDMI
equipment and the TV. It does not indicate a malfunction.
A white oval image appears on
the screen • This is due to strong light reflecting off both the TV screen and reflections
coming from behind the screens.
• Position your TV away from strong ambient light or sunlight, or lower any
ambient lights.
Problem Cause/Remedy
Sound
Problem Cause/Remedy
No sound, but good picture • Press 2 +/– or % (Mute).
• Check that “Speaker” is set to “On” in the “Setup” menu (page 29).
Noisy sound • See “Picture noise” causes/remedies on page 44.
Channels
Problem Cause/Remedy
Some channels are blank • Scrambled/Subscription only channel. Subscribe to the Pay Per View
service.
• Contact the broadcaster for transmission details.
• Check that the “Program Block” is set to “Allow” in the “Channel Setup”
menu (page 31).
General
Problem Cause/Remedy
The TV turns off automatically
(the TV enters standby mode) • Check if the “Sleep Timer” is activated, or confirm the “Duration” setting of
“On Timer” (page 28).
• If the inside of the TV grows warm while Cooling Mode is set to “High”,
the TV automatically switches to standby mode.
(When Cooling Mode is set to “Normal” under the same conditions, the
mode switches to “High”, the cooling fan starts, and a loud whirring noise
may be heard.)
The TV turns on automatically • Check if the “On Timer” is activated (page 28).
Some input sources cannot be
selected • Select “Video Labels” in the “AV Setup” menu and cancel “Skip” of the
input source (page 30).
Uneven color uniformity
appears on the screen when
the TV is powered on • After turning on the TV, you may notice a slight variation in color (tint) and
brightness in certain areas of the picture. This will last only a few minutes
each time you turn on the TV. This is a normal temperature characteristic of
the components and not a malfunction.
Continued