beautypg.com

Cinema drive, Speaker, Audio out – Sony BRAVIA KS-60R200A User Manual

Page 29: Cooling mode, Lamp replacement, Display position, Language, Product information, All reset

background image

29

GB

Usi
ng MENU F

unct

io

n

s

Cinema Drive

Provides smoother picture movement when playing DVD or VCR images taken on
film, reducing picture blur and graininess.
“Auto 1”: For a stable picture with minimal noise. Set to “Auto 2” if the screen is
partially degraded.
“Auto 2”: Use this setting for standard use.
“Off”: Turns off the “Cinema Drive” feature.

Notes

• Even if “Auto 1” or “Auto 2” is selected, “Cinema Drive” will be automatically turned off

and a moving image will not be played smoothly if the image contains irregular signals or
too much noise.

• “Cinema Drive” is not available when using Freeze or Twin Picture features, or when

watching PC, 480p, 576p, 720p, 1080i or 1080p sources.

Speaker

Switches on/off the TV’s internal speakers.
“On”: The TV speakers are turned on in order to listen to the TV’s sound through the
TV speakers.
“Off”: The TV speakers are turned off in order to listen to the TV’s sound only
through your external audio equipment connected to the audio output jacks.

Audio Out

“Variable”: The audio output from your audio system can be controlled by the TV’s
remote.
“Fixed”: The audio output of the TV is fixed. Use your audio receiver’s volume
control to adjust the volume (and other audio settings) through your audio system.

Cooling Mode

Select “High” to use the TV at an altitude of 1,500 m or higher, or to use the TV in
certain circumstances where there is a considerable rise in temperature inside the
TV. Select “Normal” to use the TV at normal altitudes.

Lamp Replacement

When the lamp nears the end of its life, a message appears every time you switch on
the TV. After you replace the lamp, select this option and follow the on-screen
procedure.

Notes

• Select this option after you replace the lamp.
• Depending on environmental and other conditions, such as frequency of use, some lamps

may burn out before the lamp replacement message appears on the screen.

• Until you set the Lamp Replacement option, a message announcing that the lamp is at the

end of its life will appear every time you switch on the TV.

Display Position

Adjust the horizontal/vertical position of the picture including menu displays and
messages, etc. on the TV screen.

Language

Selects the language in which the menus are displayed.

Product Information

Displays your TV’s product information.

All Reset

Resets all settings to the factory settings and then displays the Auto Startup screen.

Note

All settings, including language, auto tuned channels, etc. will be reset. There may be cases in
which resetting takes a long time.

This manual is related to the following products: