Assembly instructions – Stamina Products 55-2010 User Manual

Page 7

ASSEMBLY INSTRUCTIONS

STEP 3

Slide the

UPRIGHT SLEEVE(15)

onto the

UPRIGHT(4).

Slide the

TENSION CABLE(26)

into the

bottom end of the

UPRIGHT(4).

Pull the end of the

TENSION CABLE(26)

through the square hole in

the

UPRIGHT(4). CAUTION:

Be careful not to damage the

CONNECTION WIRE(30).

Connect the

CONNECTION WIRE(30)

to the

SENSOR WIRE(29).

Insert the

UPRIGHT(4)

into the

MAIN

FRAME(1)

and secure with

HEX BOLTS(M8 x 20mm)(87), LOCK WASHER(M8)(69), HEX

BOLTS(M8 x 50mm)(86),

and

NYLOCK NUTS(M8)(73).

Slide the

UPRIGHT SLEEVE(15)

down to

cover the bolts on the

UPRIGHT(4).