Assembly instructions – Stamina Products 55-2010 User Manual

Page 10

Text mode
Original mode

ASSEMBLY INSTRUCTIONS

STEP 9

There is a

"L"

decal on the

LEFT HANDLEBAR(5),

and a

"R"

decal on the

RIGHT HANDLEBAR(6).

Attach the

LEFT

and

RIGHT HANDLEBARS(5, 6)

onto the

LEFT

and

RIGHT PIVOTING ARMS(7, 8)

with

SOCKET HEAD BOLTS(M6 x 35mm)(81)

and

NYLOCK NUTS(M6)(72).

NOTE:

STEP 10

Install two

"AA"

batteries into the

METER(31),

two batteries included. Plug the

CONNECTION WIRE(30)

and the

PULSE SENSOR WIRES(32)

into the

METER(31).

Slide the

METER(31)

onto the plate on

the

UPRIGHT(4).

NOTE:

Assemble the

SOCKET HEAD BOLTS(M6 x 35mm)(81)

following the direction as shown by

the arrows. The Bolt Heads must go through the holes on the

PIVOTING ARMS(7, 8)

to attach

the

HANDLEBARS(5, 6).

Be careful not to damage the wires when attaching the

METER(31).

See page 15 for detailed battery installation instructions.

1.
2.