Star Micronics SLIP SP298 User Manual

Page 38

Print Position Control

Line feed
Prints the current line and feeds the paper to the next line.

Carriage return
The code is valid only if memory switch 3-1 is set to 1. (The
factory setting is 0.)
If the code is valid:
The function of the code changes according to the setting of
memory switch 5-8.

When memory switch 5-8 is set to 0 (factory setting): Functions in
the same way as an code (CRLF).
When memory switch 5-8 is set to 1: Executed only when printing.
The paper is not fed (CR).

“a”

Feed paper n lines
Prints the current line and feeds the paper n lines (where n is between
1 and 127).

Horizontal tab
Moves the print position to the next horizontal tab stop. Ignored if
there is no next horizontal tab stop on the current line.

“A”

Defines n/72-inch line spacing
Defines the distance that the paper advances in subsequent line feed.
The line spacing defined here is set by “2”.
0

The default value of n is 12 (1/6-inch feed)

CODE

HEX

FUNCTION

CODE

HEX

FUNCTION

CODE

HEX

FUNCTION

CODE

HEX

FUNCTION

CODE

HEX

FUNCTION

≤ ≤