Samsung HT-DB1750 - Manual (Page 10)

18
• Each time the button is pressed, the TV indicator (red) and
the DVD Receiver indicator (green) will flash alternately.
• You can operate the TV while the TV indicator is flashing
and the DVD player while the DVD indicator is flashing.
• Buttons Enabled for TV Operation: POWER, CHANNEL,
VOLUME, TV/VIDEO, and Numeric (0-9) buttons.
• By default, the remote control is set to work with Samsung
TVs. See page 61 for more information on the operation of
the remote control.
Press MODE button.
To Operate the TV and DVD Player
with a Single Remote Control
2 3 Press the MODE
button so that the
TV indicator on
the remote
control flashes.
TV DVD RECEIVER
TV DVD RECEIVER
Press the
POWER button to
turn on the TV.
5 6
Press the MODE
button so that the
DVD RECEIVER
indicator on the
remote control
flashes.
Press DVD
button to select
DVD/CD mode.
17
CONNECTIONS
Before Using Your DVD Player
Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc
you are using, these instructions may vary slightly. Read the instructions carefully before using.
• By default, the video format is set to "PAL".
• Each time the button is pressed, the video format
switches between "NTSC" and "PAL".
• Each country has a different video format standard.
• For normal playback, the video format of the disc must
be the same as the video format of your TV.
Turn off the main unit and then press NTSC/PAL.
Selecting the Video Format
1
Plug the power
cord into the AC
power supply.
4
Press TV/VIDEO
button to select
VIDEO mode.
Disc Playback
• Depending on the content of the disc, the initial screen may appear different.
• Depending on the recording mode, some MP3-CDs cannot be played.
• Table of contents of a MP3-CD varies depending on the MP3 track format
recorded on the disc.
• To resume playback, press PLAY/PAUSE
button again.
1
Press OPEN/CLOSE button to open
the disc tray.
2 Load a discs.
• Place a disc gently into the tray with the disc’s
3
Press OPEN/CLOSE button
to close the disc tray.
To temporarily pause playback,
press PLAY/PAUSE during
DVD VCD CD
• Playback starts automatically.
MP3 JPEG
• Playback starts automatically.
• If the TV is on, a list of MP3s on the
CD will appear on the TV screen.
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
DVD RECEIVER SMART NAVI
• If pressed once, “ PRESS PLAY ” is displayed and the
stop position will be stored in memory. If PLAY/PAUSE
( ) button or ENTER button is pressed, playback
resumes from the stop position. (This function works only
with DVDs.)
• If pressed twice, “ STOP ” is displayed, and if
PLAY/PAUSE ( ) button is pressed, playback starts
from the beginning.
To stop playback,
press STOP during playback.
Note