Sanyo VCC-MD500 - Manual (Page 24)

− 23 −
Note 3 Exclusive processing
Setting to auto iris mode, when SENSE UP is set
⁃
When unable to set
・ Cannot be set when the motion sensor is set to
ON.
・ Cannot be set when auto pursuit is set to ON.
Auto switch setting
・ Sets AGC to ON.
・ Sets the shutter speed to normal settings.
Set to auto switch setting when set to manual
⁃
iris (EI ON)
Auto switch setting
・ Sets the shutter speed to normal settings.
When setting SENSE UP
⁃
(*Valid with auto iris mode)
When unable to set
・ Cannot be set when the motion sensor is set to
ON.
・ Cannot be set when AGC is set to OFF.
・ Cannot be set when auto pursuit is set to ON.
Auto switch setting
・ Sets the shutter speed to normal settings.
・ Changes V-RESO UP to OFF.
When setting shutter speed to high-speed
⁃
shutter mode (SHORT)
When unable to set
・ Cannot be set when set to auto iris and SENSE
UP.
・ Cannot be set when set to manual iris and EI ON.
When setting the shutter speed to long exposure
⁃
shutter mode (LONG)
When unable to set
・ Cannot be set when set to auto iris and SENSE
UP.
・ Cannot be set when set to manual iris and EI ON.
・ Cannot be set when the motion sensor is set to
ON.
・ Cannot be set when auto pursuit is set to ON.
Auto switch setting
・ Changes V-RESO UP to OFF.
When setting the motion setting to ON
⁃
When unable to set
・ Cannot be set when set to auto iris and SENSE
UP.
・ Cannot be set when the shutter speed is set to
long exposure shutter mode (LONG).
Auto switch setting
・ Changes auto pursuit to OFF.
When setting V-RESO UP to ON
⁃
When unable to set
・ Cannot be set when the shutter speed is set to
long exposure shutter mode (LONG).
・ Cannot be set when set to auto iris and SENSE
UP.
・ Cannot be set when set to AGC ON and DNR ON.
When setting DNR to ON (*Valid when AGC ON)
⁃
Auto switch setting
・ Changes V-RESO UP to OFF.
AWhen setting AGC to OFF
⁃
When unable to set
・ Cannot be set when D/N is set to AUTO.
・ Cannot be set when set to auto iris and SENSE
UP.
When setting D/N to AUTO
⁃
Auto switch setting
・ Changes AGC to ON.
When setting auto pursuit to ON
⁃
When unable to set
・ Cannot be set when set to auto iris and SENSE
UP.
・ Cannot be set when the shutter speed is set to
long exposure shutter mode (LONG).
Auto switch setting
・ Changes the motion sensor to OFF.
Communications Protocol
Model: VCC-MD800/700/600/500/400/300