Sanyo VCC-MD500 - Manual (Page 19)

− 18 −
Message
DAY/
NIGHT
D/N COLOR *1 A0 28 00 CS FF Color Mode
D/N BLACK/WHITE *1 A0 28 01 CS FF Black and White Mode
D/N AUTO *1 A0 28 02 CS FF Color/Black and White Auto Switch Mode
D/N BURST OFF *1 A0 28 03 CS FF
Burst Settings ON/OFF
D/N BURST ON *1 A0 28 04 CS FF
D/N LEVEL *1 A0 28 05 0p CS FF Color/Black and White Switch Level Settings (0: LOW, 1: MID, 2: HIGH, 3: ADJ)
Switch Level LOW: Dark-HIGH: Bright ADJ: Manual Settings
D/N ADJ DIRECT (C->B/W) *1 A0 28 06 0p CS FF p: Color  Black and White Switch Level Manual Settings 0-6
Larger value switches darker sections (Initial value: 4)
D/N ADJ DIRECT (B/W->C) *1 A0 28 07 0p CS FF p: Black and White  Color Switch Level Manual Settings 0-6
Larger value switches darker sections (Initial value: 4)
D/N FOCUS SET (AUTO) *1 A0 28 08 0p CS FF p: Focus mode settings during D/N AUTO black and white, 0: Near infrared wavelength compensation
(MODE), 1: Corresponds to optical wavelengths (MODE2)
D/N FOCUS SET (B/W) *1 A0 28 09 0p CS FF p: Focus mode settings during D/N BLACK/WHITE, 0: Near infrared wavelength compensation (MODE),
1: Corresponds to optical wavelengths (MODE2)
DNR OFF at AGC ON *1 A0 28 14 CS FF
DNR ON/OFF
DNR ON at AGC ON *1 A0 28 15 CS FF
*1: Only MD400 CS: Checksum
*2: Only MD300 FF: Terminator
Communications Protocol
Model: VCC-MD400/300