Equipment checklist, Package contents, Optional rack-mounting equipment – SMC Networks SMC TigerCard 10G User Manual

Page 41: Equipment checklist -3

QUIPMENT

HECKLIST

3-3

Equipment Checklist

After unpacking the TigerStack 10G unit, check the contents to be sure
you have received all the components. Then, before beginning the
installation, be sure you have all other necessary installation equipment.

Package Contents

◆ TigerStack 10G unit (SMC8724M or SMC8748M)

◆ Four adhesive foot pads

◆ Bracket Mounting Kit containing two brackets and eight screws for

attaching the brackets to the switch

◆ Power cord—either US, Continental Europe or UK

◆ RS-232 console cable

◆ This Installation Guide

◆ Management Guide

◆ SMC Warranty Registration Card—be sure to complete and return to

SMC

Optional Rack-Mounting Equipment

If you plan to rack-mount the switch, be sure to have the following
equipment available:

◆ Four mounting screws for each device you plan to install in a

rack—these are not included

◆ A screwdriver (Phillips or flathead, depending on the type of screws

used)