Sony SAT-W60 - Manual (Page 21)

Using the Remote Control and Basic Functions
21
Setting up the Remote Control
The remote control can be programmed to operate
most brands of audio/video equipment.
1
Find the code(s) for the manufacturer of the
device you want to operate with this remote
control.
You can find these codes on page 22 and 23.
2
Press the CODE SET button.
The function indicators begin flashing.
3
Press the 0–9 buttons to input the manufacturer
code, then press the ENTER button.
The function indicator goes off, and the remote is
set up to operate that device.
4 Test the remote control.
Press the POWER button for the device you want
to control, then press other operation controls
such as the CH +/– buttons.
If the device does not respond to the remote
control, repeat from step 2 and enter a different
manufacturer code in step 3.
1 2
4 5 6
7 8 9
0 .
3
RM-Y804
CH VOL
SCROLL
INFO OPTIONS
EXIT
RECENT
TV/WEB
MENU
PIP
POWER MUTING
WINDOW
TV/VIDEO
TV
TV
FUNCTION
SAT
SAT
ENTER
MY SHOWS
GUIDE
CODE SET
BACK HOME
CODE SET
FUNCTION
SAT TV
1 0 1 ENTER
z Tip
Remember to aim the remote control at
the device you are trying to operate.
01USBook.BOOK Page 21 Wednesday, July 5, 2000 12:24 PM