Sony AIRLINK HELIX 2140847 - Manual (Page 39)

Configuring LAN/WiFi
Rev 3.0D May.10 33
WPA Enterprise
WPA Enterprise adds another layer of security to WPA by requiring clients
authenticate with a server before being able to access the network. Clients
connecting to the Helix when WPA Enterprise is enabled will need to have
certificates installed from the RADIUS server, allowing them access to the
network before being allowed to connect.
Figure 7-5: ACEmanager: WiFi - WPA/WPA 2 Enterprise
Command Description
WiFi Encryption TKIP or AES. Defines what encryption scheme to use under WPA. Options are Temporal
Key Integrity Protocol (TKIP) and Advanced Encryption Standard (AES).
WPA Passphrase By default this is 'HelixWPAPassphrase'. You can change this to another phrase with
alphanumeric characters and symbols when creating a passphrase.
Command Description
WiFi Encryption TKIP or AES. Defines what encryption scheme to use under WPA. Options are Temporal
Key Integrity Protocol (TKIP) and Advanced Encryption Standard (AES).
Primary or Secondary
Radius Server IP
This is the IP address of your enterprise RADIUS server. These servers must be accessible
ALL the time or clients will not be able to connect via Wi-Fi. The secondary server is
optional and used when the primary server is not available.
Secondary Radius
Server Port
This is the port number of your enterprise RADIUS server. The secondary port is used
when the primary is unavailable.
Primary or Secondary
Radius Server Secret
This is the shared secret key used to secure communications with the RADIUS server.