Sharp PG-M20X - Manual (Page 60)

56
Saving Projected Images
• This projector allows you to capture projected images (RGB signals) and set them as a
startup image, or background image when no signals are being received.
• You can capture the images that are input using analog RGB signals and Digital DVI XGA
signals.
Capturing the Image
Select “Image Capture” in the “Options
(1)” menu
➝ For details, see page
38 .
1
Press or to select
“ Save Image” and press .
• The projected image is captured. It
may take some time for capturing.
2
1 1 1 1 1 Press or to select
“Yes”.
2 2 2 2 2 Press
.
Note
• This function only works in 1024 x 768
(XGA) with the exception of 43 Hz vertical
which is a interlaced signal.
• The saved image is reduced to 256 col-
ors.
• Images from equipment connected to IN-
PUT 2 or INPUT 3 cannot be captured.
Deleting the Captured
Image
1
Select “ Delete” and press
.
2
1 1 1 1 1 Press or to select
“OK”.
2 2 2 2 2 Press
.
-56