Sony R-DG1200 - Manual (Page 97)

97 US
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01US-
STRDG1200CEL\090OTH.fm masterpage: Right
STR-DG1200
3-289-135-11(1)
Oth
e
r Op
eratio
ns
About the indicators on the display window
HDMI
LFE SW
L C R
SL S SR
SB L SB SB R
MULTI IN
COAX OPT D + EX TrueHD Neural THX DTS D.RANGE CAT B SLEEP + A SP ES 96 24 / - -
DTS - HD MSTR HI RES NEO:6 PL ll MEM MONO ST X
DMPORT ANALOG LPCM EQ - Bl AMP XM SIRIUS A.DIRECT
Name Function
A SW Lights up when subwoofer
is connected and the audio
signal is output from the
SUBWOOFER jack. While
this indicator lights up, the
receiver creates a
subwoofer signal based on
the LFE signal in the disc
being played back or the
low frequency components
of the front channels.
B LFE Lights up when the disc
being played back contains
an LFE (Low Frequency
Effects) channel and the
LFE channel signal is
actually being reproduced.
C COAX Lights up when INPUT
MODE is set to “AUTO”
and the source signal is a
digital signal being input
through the COAXIAL
jack.
D OPT Lights up when INPUT
MODE is set to “AUTO”
and the source signal is a
digital signal being input
through the OPTICAL jack.
E ; D/
; D EX/
; D+/
; TrueHD
“; D” lights up when the
receiver is decoding Dolby
Digital signals.
“; D EX” lights up when
the receiver is decoding
Dolby Digital Surround EX
signals.
“; D+” lights up when the
receiver is decoding Dolby
Digital Plus signals.
“; TrueHD” lights up
when the receiver is
decoding Dolby TrueHD
signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set
to “AUTO” (page 93).
F Neural-THX Lights up when the receiver
applies Neural-THX
processing to input signals.
Name Function
continued