Sanyo KH2672R User Manual

Page 8

1 - 7

1) When two remote control units are being used in one group control*

system,
a) the most recent button that is pressed on any remote control unit

is effective.

b) either a main-remote control unit or a sub-remote control can set

the timer.

*Group control means that maximum up to 8 indoor units can be

concurrently controlled with a remote control unit.

2) If a power failure occurs in timer mode, the time counted up to that

point will be stored in memory.
After power is restored, the timer starts again counting up to the set
time.

NOTE

Remote Control Unit (continued)

NOTE

06-212 PAC-i_IM_Sec1 4/12/06 7:15 PM Page 7