Automatic exposure adjustment – Sharp AR-151 User Manual
Page 34
32
5
Copier trouble?
AUTOMATIC EXPOSURE ADJUSTMENT
The automatic exposure level can be adjusted to suit your copying needs.
Press the exposure mode selector key to select the photo (
) mode.
Press and hold down the exposure mode selector key for approximately 5 seconds.
The photo (
) indicator will go out and the AUTO indicator will begin to blink. One or
two exposure indicators corresponding to the automatic exposure level which has
been selected will light up.
Press the light (
) or dark (
) key to lighten or darken the automatic exposure level
as desired.
If exposure level 2 is selected, the two left-handmost indicators for that level will light
up simultaneously. Also, if level 4 is selected, the two right-handmost indicators for that
level will light up simultaneously.
Press the exposure selector key. The AUTO indicator will stop blinking and light up
steadily.
This automatic exposure level will remain in effect until you change it again by
this procedure.