Sharp AR-151 - Manual (Page 21)

19
3
Special functions
SPECIAL FUNCTIONS
This chapter describes the special functions of this copier. Use these functions as needed.
DESCRIPTION OF SPECIAL FUNCTIONS
Toner save mode (page 19)
Reduces toner consumption by approximately 10%.
Power save modes (page 20)
The copier has two power save modes of operation: preheat mode and auto power shut-off
mode.
● Preheat mode
When the copier enters the preheat mode, the power save (
) indicator will light up and
other indicators will remain on or off as before. In this condition, the fuser in the copier is
maintained at a lower heat level, thereby saving power. To copy from the preheat mode,
make desired copier selections and press the print (
) key using the normal copying
procedure.
● Auto power shut-off mode
When the copier enters the auto power shut-off mode, the power save (
) indicator will
light up and other indicators will go out. The auto power shut-off mode saves more power
than the preheat mode but requires a longer time before starting copying. To copy from the
auto power shut-off mode, press the print (
) key. Then make desired copier selections
and press the print ( ) key using the normal copying procedure.
Auto clear (page 20)
The copier returns to the initial settings a preset amount of time after the last copy is made.
This preset amount of time (auto clear time) can be changed.
TONER SAVE MODE
Press the exposure mode selector key to select the manual ( ) mode.