beautypg.com

3 | pptp/ l2tp configuration example, 3 | pptp/ l2tp configuration example 54 – SMC Networks Barricade BR14VPN User Manual

Page 60

background image

8.3 | PPTP/ L2TP configuration example

Pease note that the virtual address of the L2TP and PPTP server have to be
different.
PPTP

Step 1: Go to the PPTP Server section and select the Enable radio button

Step 2: Change the virtual IP value if necessary (this is the IP network that your
PPTP clients will automatically be connected to)

Step 3: Set the authentication protocol

Step 4: Enter a tunnel name and set the username and password

Step 5: Configure your remote VPN client to connect to the WAN IP of the router

L2TP

Microsoft uses an embedded L2TP/IPSEC VPN implementation. In order to use the Microsoft
standard VPN client, one has to disable the IPSEC on the PC. Please refer to Microsoft help
to perform this operation.

Step 1: Go to the L2TP Server section and select the Enable radio button

Step 2: Change the virtual IP value if necessary (this is the IP network that your
L2TP clients will automatically be connected to)

Step 3: Set the authentication protocol

Step 4: Enter a tunnel name and set the username and password

Step 5: Configure your remote VPN client to connect to the WAN IP of the router

54

This manual is related to the following products: