SMC Networks Barricade BR14VPN - Manual (Page 59)

VPN Settings – Tunnel 1 – Set IPSec Proposal
Set the Tunnel 1 IPSec Proposal settings as follows:
ID: 1
Proposal Name:
1
DH Group: Group2
Encap. protocol: ESP
Encrypt. algorithm: DES
Auth. Algorithm: MD5
Life Time: 10000
Life Time Unit: Sec.
When finished, save the settings.
Now to view the VPN connection process, go to the STATUS page and view the System Log.
Now PC1, with IP 192.168.1.100 has access to PC2, with IP 192.168.2.100
8.2 | Tunnel between a SMCBR14VPN and standalone client.
Alternatively, a tunnel can be established between a PC and SMCBR14VPN. The easiest way
to this is to use an IPSEC VPN client software running at the PC. After configuring the client
accordingly, the only change to the configuration is the remote mask, which in this case
would be 255.255.255.255, as we are configuring a tunnel for only one client. If clients are
connecting from various IPs, dynamic VPN is a good solution for this.
53