Sanyo CA21XS2S - Manual (Page 12)

12
This function can be utilized after Automatic
Tuning.
For example, to copy a TV channel on pro-
gramme position “2” onto programme position
“6”;
2
Use this channel swapping feature to swap the
channels between two stored programme position.
This feature is particularly useful after automatic
tuning.
For example, to swap the channel between pro-
gramme position “6” and programme position
“12”.
6 12
SEARCH
SYSTEM
MODE SEMI
START
AUTO
SIF BG
POSITION 6
❒ Channel Copy
1
Select programme position “2”
2
Enter to SEMI-AUTO or MANUAL tuning
mode. (Refer to page 11.)
3
Select “POSITION” with the Programme UP
or DOWN button.
4
Select position “6” with the VOLUME + or -
button.
5
Select “MEMORY” by pressing the
Programme UP or DOWN button.
6
Press the VOLUME + or - button to
memorize.
7
Press the MENU button to return to normal
TV display.
❒ Channel Swapping
1
Select programme position “6”.
6
2
Press the SWAP button.
SWAP 6 AND -
The two TV channels will now have changed
places.
6
12
SWAP 6 AND 12
6
SWAPPING
3
Press the DIGIT button, “ 1 “ button and then
“ 2 ” button on the remote control to enter
programme number 12. (For example, to
enter programme number “ 3 “, press “ 3 ”
button only. )
When there is a position you do not use, Position 4
for example, by setting the SKIP Channel function it
is possible to jump over this position, when you are
selecting a channel using the Programme
UP/DOWN or CHANNEL SCAN button.
3 4 5
Skip
For example, to set programme position “4” as
Skip channel ;
SEARCH
SYSTEM
MODE SEMI
START
AUTO
SKIP
MEMORY OFF
--
SIF BG
POSITION 4
❒ Skip Channel Set and cancel
1
Enter to SEMI-AUTO or MANUAL tuning
mode. (Refer to page 11.)
2
Select “POSITION” with the Programme UP
or DOWN button.
3
Press remote control “4” button to select
programme position 4. Use the DIGIT button
and Programme Selector (Number buttons)
to enter programme number. Do not use the
VOLUME + or - button to enter programme
position in this settings.
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 12