Sanyo CA21XS2S - Manual (Page 11)

11
Tuning of the Channels
Up to 256 broadcast stations in your reception
area can be stored in the electronic memory.
There are three ways of tuning as follows;
1. Automatic Tuning (the basic way):
All receivable channels are automatically tuned
in and memorized in consecutive programme
position.
2. Semi-Auto Tuning:
Use to preset a receivable channel in any
desired programme position, e.g. the position
with the same number as the channel.
3. Manual Tuning:
Manually tune a channel if it cannot be
automatically tuned, such as when the signal is
poor.
■ ■ The Automatic Tuning operation can be
cancelled at any time by pressing the
Programme UP or DOWN button.
After all receivable channels have been found and
stored, the TV set automatically returns to pro-
gramme position “1”.
-/- -
-/- - -/- - -/- -
-/- -
-/- -
-/- -
MENU
CH
CH
1
AUDIO
LANGUAGE
PICTURE
PRESET
SYSTEM
POSITION 1
AUTO
SIF BG
MODE AUTO
SEARCH START
SEARCH
SYSTEM
POSITION
START
1
AUTO
SIF BG
MODE AUTO
❒ Automatic Tuning
1
Press the MENU button for MAIN menu
display.
2
Select “PRESET” by pressing the
Programme UP or DOWN button
.
3
Press the VOLUME + or - button for
PRESET menu display. On entering PRESET
display, Automatic Tuning will be selected
initially.
4
Select “SEARCH” by pressing the
Programme UP or DOWN button.
5
Press the VOLUME (+) button to start
channel tuning
.
The VOLUME + button will move tuning toward the
higher frequencies, and the VOLUME - button will
move tuning toward the lower frequencies.
Semi-Auto Tuning:
Press and release the VOLUME + or - button
to search for required TV station. Once a station
is located, tuning will automatically stop.
Continue till desired channel is located.
Manual Tuning :
Press and hold the VOLUME + or - button to
search for required TV station.
To preset other Programme Positions, repeat steps
5-7.
SYSTEM
POSITION 6
AUTO
MODE SEMI
SEARCH START
SYSTEM
POSITION 6
AUTO
MODE SEMI
SEARCH
SYSTEM
POSITION 6
AUTO
MODE MANUAL
SEARCH
SKIP OFF
MEMORY OK
SELECT ADJUST BACK
EXIT
❒ Semi-Auto Tuning and Manual Tuning
1
Press the MENU button for MAIN menu
display.
2
Select “PRESET” by pressing the
Programme UP or DOWN button.
3
Press the VOLUME + or - button for
PRESET
menu display. On entering
PRESET display, Automatic Tuning will be
selected initially.
4
Select “SEMI” or “MANUAL” by pressing the
VOLUME + or - button
.
5
Select “SEARCH” by pressing the
Programme UP or DOWN button.
6
Once desired channel is located, select
“MEMORY” by pressing the Programme UP
or DOWN button.
7
Press the VOLUME + or - button to enter the
desired channel into memory.
8
Press the MENU button to return to normal
TV display.
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 11