Siemens HD2528U EN - Manual (Page 46)

Cleaning and Maintenance
English 44
3. Flip lever on hinge toward you.
4. Close the door to approximately halfway open.
5. Holding the door firmly on both sides using
both hands, pull the door straight out of the
hinge slots. Hold firmly, the door is heavy.
6. Place the door in a convenient and stable
location for cleaning.
Replacing the Oven Door 1. Holding the door firmly in both hands, place hinges in hinge slots.
2. Open door all the way to expose hinges and slots. Push lever (one on each
hinge) away from you (back toward range).
3. After moving the hinge brackets back down into position, be sure to close
and open the door slowly to assure that it is correctly and securely in place.
4. Door should be straight, not crooked.
Replacing an Oven Light Each light assembly consists of a removable lens, a light bulb and a light socket
housing that is fixed in place.
1. Read the WARNING above.
2. Turn off power at the main power supply (fuse or breaker box).
3. Remove the lens by unscrewing it.
4. Remove the light bulb from its socket by unscrewing it.
5. Replace the bulb with a new 40 watt appliance bulb. Avoid touching the bulb
with fingers, as oils from hands can damage the bulb when it becomes hot.
6. Screw the lens back on.
7. Turn power back on at the main power supply (fuse or breaker box).
Figure 17: Hinge Positions
WARNING:
• Make sure the appliance and lights are cool and power to the
appliance has been turned off before replacing the light
bulb(s). Failure to do so could result in electrical shock or
burns.
• The lenses (if equipped) must be in place when using the
appliance.
• The lenses (if equipped) serve to protect the light bulb from
breaking.
• The lenses (if equipped) are made of glass. Handle carefully
to avoid breaking. Broken glass could cause an injury.
• Light socket is live when door is open