Siemens HD2528U EN - Manual (Page 23)

English 21
This section explains how to operate the oven. See “Getting the Most Out of
Your Oven” on page 29 for guidelines to improve oven results.
About the Oven
Operation
CAUTION:
Do not use aluminum foil or protective liners to line any part of an
appliance, especially surface unit drip bowls or oven bottom. Installa-
tion of these liners may result in a risk of electric shock or fire.
Setting the Cooking Mode
and Temperature
Note:
To back out of a current mode, press OFF. (Selecting OFF when not
setting the cooking mode will turn the oven off.)
1. Press COOKING MODE.
2. BAKE will flash in the display.
3. If no change is made within 5 seconds,
control will beep and flash. If this occurs,
press START.
4. To change the cooking mode, turn knob.
5. Press START.
6. The selected mode will appear in the display, along with the default temper-
ature for that mode, which will be blinking.
7. To select a different temperature, turn knob to the right or left (in 5° incre-
ments) to desired temperature.
8. Press START. If not pressed, oven automatically turns on in 5 seconds.
9. The display alternates between the cooking mode and preheat.
The preheated temperature is displayed, starting at 100ºF. The actual tempera-
ture increases until set temperature is reached, at which point the oven will
beep.
10. To change temperature during cooking, press TEMPERATURE. Turn the
knob to select new temperature and press START.
11. Once cooking has been completed, press OFF to turn off oven.
Automatic Convection Conversion
(models with convection bake)
In the convection bake mode, the temperature is automatically reduced 25° F
from the package or recipe temperature. Simply enter the package or recipe
temperature when setting the mode and the range calculates the correct tem-
perature.
The Automatic Convection Conversion feature can be turned off to allow for
manual temperature adjustment. See “Turn Automatic Convection Conversion
ON or OFF” on page 18 for details.
When the Automatic Convection Conversion feature is activated, the display will
read AUTO CONV BAKE. When the feature is turned off, it will read CONV
BAKE.
Operation - Oven
BAKE 100
6: 35
PM
380