Siemens HD2528U EN - Manual (Page 16)

Getting Started
English 14
Control (Panel)
Oven Control Panel
You control the operation of the range by using the touch pads, dial and control
knobs.
The touchpads, in conjunction with the dial, are used to select an oven mode,
set the oven temperature, set the time(s) and to set up your range. To use the
touchpad, press the center part of the pad with the flat part of your fingertip. A
beep will sound to indicate that the selection has been made. Turn the dial to the
desired setting and press START.
The knobs are used to control the heat level of the burners. Push down and turn
to the symbol to light and then to the desired heat setting.
See the sections on Using the Cooktop, Using the Oven and Using the Warming
Drawer for detailed instructions.
Figure 10: Oven Control Panel
Cooking Mode
Temperature
Start
Light
Time
Off
Cooking
Mode Indicator Preheat Temperature
Lock Indicator
Clock
Oven Temperature
Control Knob
AM
PM
Table 1: Oven Control Panel
Clock– Shows the time of day with a 12 or 24 hour option.
Also displays the timer and times associated with delayed
cooking and cleaning modes. Turn the control knob to tog-
gle between timer and clock display. Press TIME and turn
the control knob to change the time of day or the
timer.
Cooking Mode - Press pad to display cooking mode.
Cooking Mode Icon – Shows the cooking elements that
are active for the mode that is selected. The icon will also
display a fan if the convection fan is utilized in the selected
mode.
Control Knob - Used to set the clock, timers, select cook-
ing mode and temperature. Turn clockwise to increase and
turn counterclockwise to decrease.
Light - Press pad to turn oven light on or off.
Door Locking Indicator - Icon is displayed during the
self-clean mode when the door is locked. DO NOT attempt
to open the door until the lock symbol is no longer present.
Off - Press pad to turn off oven and/or warming drawer.
Oven Temperature - Shows the oven temperature.
Preheat Temperature - Displays temperature of oven dur-
ing preheat mode.
Probe Indicator (some models) - Indicates that the probe
is properly inserted into the probe receptacle in the oven.
Start - Press pad to complete an entry.
Temperature - Press pad to select cooking temperature.
Time - Press pad to set or change the time of day or the
timer.
Timer – There are two timers - TIMER 1 AND TIMER 2;
Each counts down the time in hours and minutes. With
less than 60 minutes remaining, the timer also displays
seconds. Press Time to access the timers.
Warming Drawer Indicator - Indicates that the warming
drawer is on. Also displays the warming drawer setting.