Setting the self-clean mode, Press cooking mode, Press start. self clean flashes. press start – Siemens HD2528U EN User Manual
Page 44: Remove racks, Press start again to begin the self- clean, Delaying the start of the self-clean, Press start, Self clean end appears in the display, After self-cleaning
Cleaning and Maintenance
English 42
5. Be sure oven light is turned off and the light bulbs and lens covers are in
place. Do not operate oven without light bulb and cover in place.
Important: Do not use Commercial Oven Cleaners on the self-clean oven or
any part because they will damage the finish or part.
Setting the Self-Clean Mode
1. Press COOKING MODE.
2. Turn knob until SELF CLEAN mode appears. Press START.
3. The default cleaning time is 4 hours. To
change cleaning time, turn knob to change
number of hours. Otherwise, continue to
step 4.
4. Press START. SELF CLEAN flashes.
Press START.
5. REMOVE RACKS appears in the dis-
play as a reminder to remove oven
racks.
6. Press START again to begin the self-
clean.
Note:
The door locks at the beginning of the cycle; The door lock symbol
will appear in the display at this point. If door does not lock, press
OFF and do not self-clean; phone service.
Delaying the Start of
the Self-Clean
Note:
The time of day must be correctly set for this option to work properly.
See section “Setting the Clock” in “Getting Started”.
1. Press COOKING MODE.
2. Turn knob until SELF CLEAN mode appears. Press START.
3. The default cleaning time is 4 hours. To change cleaning time, turn knob to
change number of hours. Otherwise, continue to step 4.
4. Press START.
5. Turn knob until DELAYED CLEAN mode
appears. Press START.
6. SELF CLEAN END appears in the display.
7. Turn knob to enter the time of day you want
the self-clean to end: Set hours, press time,
set minutes.
8. Press START. The display will remind you
to remove oven racks.
9. Press START. The display shows DELAYED CLEAN. The self-clean will
automatically start at the appropriate time.
Note:
In the Delayed Self-Clean Mode, the door latch automatically acti-
vates at the beginning of the cycle. The door lock symbol will appear
in the display.
Note:
The oven lights do not operate in the Self-Clean mode.
After Self-Cleaning
1. At the end of the programmed cleaning time, the oven will automatically turn
off. SELF CLEAN END appears in the display. Press OFF to clear.
3
SELF CLEAN
3: 00
REMOVE RACKS
4: 00
SELF CLEAN
3: 00
Delayed CLEAN
SELF CLEAN
5: 45
SELF CLEAN END
SELF CLEAN