Sony HK-PSU02 - Manual (Page 22)

1-16
MVE-8000A
: COM CPU-1
: COM CPU-2
SW1 (D-5) : RESET switch
Pressing this switch resets the CPU-DK module.
n
In some machines in which the CPU-DK module is
installed, the system reset may be activated.
SW2 (C-5) : MODE switch
Used only for production in the assembly factory. All
switches are set to OFF for normal operation.
Factory setting is all OFF.
: PC card
D1 (A-1) : DETECT A
Lit when a compact flash is inserted correctly into socket
A.
D2 (A-1) : DETECT B
Lit when a compact flash is inserted correctly into socket
B.
D3 (A-1) : + + + + + 3.3 V
+3.3 V power supply status indication.
Lit when
+3.3 V power is supplied.
D4 (A-1) : ACTIVE A
Lit or flashes during communication with the compact
flash in socket A.
D5 (A-1) : ACTIVE B
Lit or flashes during communication with the compact
flash in socket B.
D6 (A-1) : CD (Card Detect) status LED
Lit when the DIF-130 board is inserted into the parent
board correctly.
D7 (A-1) : GPO status LED
This switch is currently not in use.
D100 (B-1) : REF OK status LED
Lit while V sync of the reference input is detected.
D101 (B-1) : REF EXT status LED
Lit while sync signal is input to the reference input.
D200 (B-1) : LOCK status LED
Lit while the machine is locked to the reference signal.