Sony HK-PSU02 - Manual (Page 12)

1-6
MVE-8000A
B3 x 5
Cover panel
(Slot 2)
B3 x 5
Cover panel
Slot 1
1-4-2. Installing the Connector Board
The board slot
Name of option Name of board Slot on the rear side
MKE-8020A CN-2153 board 1
Installation procedure
Parts required (Supplied accessory of MKE-8020A)
. Connecting cable
. Cable holder bracket
1. Remove the two screws and remove the cover panel.
n
Store the removed cover panel in a safe location.
2. Insert the connector board horizontally level and
secure it with the two fixing screws.
Connecting the connecting cable
3. Remove the two screws of the slot 2 cover panel.
4. Connect the connecting cables to the connectors.
Fixing screw
Fixing screw
Connector board
Slot 1
Connectors
Connecting cables