Operation, Software upgrade, Reset function – Samsung HW-C500 User Manual

Page 48

Operation

Reset function

When the Power is on,

Press the MUTE button.

MUTE appears on the display.

Press the 9 button ﬁ ve times and then press the ENTER button.

INITIAL : NO appears on the display.

Press the ▲▼ buttons to select YES.

The unit will turn off after 5 seconds.

When the Power is Off,

Press and hold the MEMORY button on the front of your AV Receiver for longer than 5 seconds.

POWER LED will blink one time.

Using the RESET function will erase all stored settings.

Do not use this unless necessary.

SOFTWARE UPGRADE

Samsung may offer upgrades for AV Receiver's ﬁ rmware in the future.

Please visit Samsung.com or contact the Samsung call centre to receive
information about downloading upgrades and using a USB drive.
Upgrades will be possible by connecting a USB drive to the USB port
located on your AV Receiver.

Insert a USB drive containing the ﬁ rmware upgrade into the USB port
on the back of the main unit.

Please be careful to not disconnect the power or remove the USB
drive while upgrades are being applied. The main unit will turn off
automatically after completing the ﬁ rmware upgrade.
When software is upgraded, settings you have made will return to
their default (factory) settings. We recommend you write down your
settings so that you can easily reset them after the upgrade.

If you failed software upgrade, it is strongly recommended whole USB data
format to FAT16 and retry software upgrade.

The NTFS USB File System can not be supported.

Depending on the manufacturer, the USB may not be supported.

•









SLEEP

PROLOGIC

AUDIO ASSIGN

DSP

SLEEP

PROLOGIC

AUDIO ASSIGN

DSP

TUNER MEMORY SUBWOOFER

MO/ST

MUTE

ASC

VOL

TUNING

/CH

SETUP/MENU

RETURN

EXIT

INFO

POPUP