Samsung HW-C500 - Manual (Page 33)

33
ENG
●
SETUP
SETTING THE SPEAKER SIZE
Signal outputs and frequency response from the speaker will be adjusted according to your speaker confi guration and whether
certain speakers are used or not.
Press the SETUP/MENU button.
Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
Press the ENTER button to select SETUP ENTER.
Press the ▲▼ buttons to select SPK SIZE, and then press the ENTER
or ► button.
Press the ▲▼ buttons to select the speaker you want, and then press
the ENTER or ► button.
Each time you press the ▲▼ buttons, FRONT ÆCENTER Æ SURR Æ
SUBW Æ CROVR will be selected in turn.
Press the ▲▼ buttons to set the mode (LARGE, SMALL etc.) for the
selected speaker.
Repeat steps 3-5 to set the mode for each speaker.
- To exit setup mode -
Press the SETUP/MENU button.
SETUP OFF appears on the display and Setup Mode is exited.
Setting the Speaker
SPEAKER Possible Settings Default Setting
FRONT (Front) LARGE, SMALL SMALL
CENTER (Center) LARGE, SMALL, NONE SMALL
SURR (Surround) LARGE, SMALL, NONE SMALL
SUBW (Subwoofer) YES, NO YES
CROVR (Crossover Frequency) 60, 80, 100,120, 150, 180, 200(Hz) 100Hz
LARGE : Select when using large speakers. You can listen to full range sound.
SMALL : Select this when using small speakers
NONE : Select when no speaker is used
YES (subwoofer) : Select when using the subwoofer speaker.
NO (subwoofer) : Select when not using the subwoofer speaker.
CROVR : Select the crossover frequency for the best bass response in your room.
You can also use SETUP, ,,., <, >, ENTER on the front of your AV Receiver.
When the Front speaker is only set to LARGE, you can select LARGE of other speakers.
1.
•
2.
3.
4.
•
5.
6.
•
•
•
•
•
•
•
M


Ж
Ж
HW-C500-C560S-XAC_0616.indd 33 HW-C500-C560S-XAC_0616.indd 33 2010-06-16 2:08:25 2010-06-16 2:08:25