Sanyo PLC-WXL46 - Manual (Page 18)

PLC-WXE46/WXL46 Basic Serial Command Specifications
18/24
6.47. POINTER UP Command
Command “C3C” [CR]
Detail
Move up the Pointer of On-Screen Display Menu.
This command works the same way as the pointer “
▲” of the remote control
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.48. POINTER DOWN Command
Command “C3D” [CR]
Detail
Move down the Pointer of On-Screen Display Menu.
This command works the same way as the pointer “
▼” of the remote control
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.49. ENTER Command
Command “C3F” [CR]
Detail This command works the same as “SELECT” button of the remote control.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.50. FREEZE ON Command
Command “C43” [CR]
Detail
Freeze on-screen image.
This command works the same way as “FREEZE” button of the remote control for
Freeze ON, but does not work for Freeze OFF.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.51. FREEZE OFF Command
Command “C44” [CR]
Detail
Cancel Freeze mode.
This command works the same way as “FREEZE” button of the remote control for
Freeze OFF, but does not work for Freeze ON.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.52. Computer 1 Analog RGB Command
Command “C50” [CR]
Detail
Select Analog RGB in Computer 1 input.
Although Input search is set to On1/On2, search is not executed with this
command
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]