Sanyo PLC-WXL46 - Manual (Page 11)

PLC-WXE46/WXL46 Basic Serial Command Specifications
11/24
6.5. POWER ON Command
Command “C00” [CR]
Detail
Power ON
When already Power is ON, nothing is done.
When sending this command during processing Countdown, Countdown is
terminated.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.6. POWER OFF Command Quick Power OFF
Command “C01” [CR]
Detail
Power OFF (Standby)
When Power is OFF with ON/STAND-BY button of the remote control, “Power
OFF?” is displayed. However, as soon as this command is sent, Quick Power OFF
is executed.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.7. POWER OFF Command
Command “C02” [CR]
Detail
Power OFF (Standby).
The command operates the same Power OFF function as ON/STAND-BY button
of the remote control.
Once this command is sent, “Power OFF?” is displayed. If this command is sent
again while it is displayed, Power OFF is executed.
When sending this command during Countdown, Countdown is terminated.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.8. Computer 1 Command
Command “C05” [CR]
Detail
Select Computer 1 Input
Although Input search is set to On1/On2, the search is not executed with this
command.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.9. Computer 2 Command
Command “C06” [CR]
Detail
Select Computer2 Input
Note 1) Although Input search is set to On1/On2, the search is not executed with
this command.
Note 2) When Monitor out is selected in a menu “Terminal”, the command is not
executed while projector returns “OK”
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]