Sanyo PLC-WXL46 - Manual (Page 15)

PLC-WXE46/WXL46 Basic Serial Command Specifications
15/24
6.29. MENU OFF Command
Command “C1D” [CR]
Detail Hide On-Screen Display Menu.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.30. DISPLAY CLEAR Command
Command “C1E” [CR]
Detail
Hide On-Screen Display.
Hide On-Screen Display unconditionally.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.31. BRIGHTNESS + Command
Command “C20” [CR]
Detail Brightness of User Control +1.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.32. BRIGHTNESS – Command
Command “C21” [CR]
Detail Brightness of User Control –1.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.33. IMAGE (Toggle) Command
Command “C27”[CR]
Detail
Switch Image Setting status.
This command works the same way as “IMAGE” button of the remote control.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]
6.34. ON START Setting Command
Command “C28” [CR]
Detail
Enable Power ON Start.
This status is stored in EEPROM and retained regardless of Power OFF/ON.
Response
Acceptable [ACK] [CR]
Unacceptable “ ”[CR]