Sanyo XACTI VPC-GH3GX - Manual (Page 7)

English
vi
Copy data from your camera to the computer
Connect your camera to a computer, and copy the desired data to the
computer.
1
Turn on the computer, and use the supplied dedicated USB interface
cable to connect your camera to the computer.
h Connect the cable between the camera’s USB/AV terminal and the
computer’s USB connector.
2
Turn on the camera (page 30).
h The USB Connection Screen appears on the camera’s monitor.
SET
USB CONNECTION
COMPUTER
PRINTER
CANCEL
CANCEL OK
To USB/AV terminal
Supplied dedicated USB interface cable
To USB connector