Sanyo XACTI VPC-GH3GX - Manual (Page 156)

147
English
For Windows 2000 users (except for the SDXC card)
Mounting your camera
1
Set the camera to the card reader mode (page 143).
h If a message appears on the computer monitor instructing you to load
the Windows CD-ROM, follow the instructions and install the driver.
h The camera is recognized as a drive, and [Removable disk] appears in
the [My Computer] window.
h The card is recognized (mounted) as a disk.
Dismounting the camera
CAUTION
i To disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
loss of card data.
1
Left-click on [Unplug or Eject Hardware] in the task tray.
h A list appears showing the devices connected to the computer’s USB
connector.
2
Left-click on the camera drive.
h The [Safe to Remove Hardware] dialog box will open.
3
Click on the [OK] button.
h You can now disconnect the camera.