Sharp AR-C160 - Manual (Page 90)

4-6
CHAPTER
4
3 Tap on the top of the new toner cartridge 5 times. Then
hold the toner cartridge horizontally and vigorously
shake it about 20 times. This will loosen the toner and
allow it to flow more easily into the toner hopper.
CAUTION
Be sure to perform these steps. If not, toner may not flow easily into
the toner hopper.
4 Place the new toner cartridge with the protrusions into
the notches of the relevant toner hopper as shown.
● The left example shows the toner hopper of black toner.
5 Slide the toner cartridge along the guides over the toner
hopper.
6 Hold the toner cartridge with one hand while pulling on
the sealing tape to remove it.
● It will take about 40 seconds for the cartridge to empty.
ADDING TONER
SUPPLIES
Adding toner
Sealing tape
5 x
20 x