Sharp AR-C160 - Manual (Page 88)

4-4
CHAPTER
4
PAPER
Changing the copy paper size in the tray
1 Gently lift and pull out the paper tray until it stops.
2 Adjust the paper size indicator to match the paper size
to be set.
● Slide the paper size indicator to the right or left to match the paper
size.
3 Adjust the front guide and left guide while squeezing
their lock levers.
● Slide the front and left guides to match the width and length of the
copy paper.
4 Load copy paper into the tray.
5 Place the paper size card in the front of the paper tray.
● The paper size card has three faces. Fold the card properly to
show the selected paper size. The paper size indication which
shows through the slot on the front of the copier should match the
selected paper size.
6 Push the paper tray firmly back into the copier.
SUPPLIES
Paper
Paper size indicator
Left guide Front guide
Maximum height line
Paper size card