Sanyo VPC-X1200GX - Manual (Page 39)

37
English
OTHER DEVICES AND CONNECTIONS
CONNECTING TO A TV
Connect the supplied AV interface cable from the USB/AV terminal on the
digital camera to the AUDIO and VIDEO input terminals on the TV.
Playback
i After connecting the digital camera to the television, set the TV input switch
to VIDEO input.
i When an AV interface cable is connected, no image appears on the
camera’s monitor.
i The playback method is the same as when viewing images on the
camera’s monitor.
i The same playback procedure as when playing back with the camera is
used to play back voice memos and audio recordings as well.
CAUTION
Insert and pull out the cable carefully
i When connecting the cables, make sure that the cable plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the connector pins in
the terminal socket.
i Do not use excessive force when connecting and disconnecting cables.
Yellow plug
To the VIDEO input
terminal
White plug
To the AUDIO input (L)
terminal
To the USB/AV terminal
Switch input to
VIDEO
Supplied dedicated
AV interface cable