Sanyo VPC-X1200GX - Manual (Page 12)

English
10
1 [Clock set]
h Set the camera’s internal
clock.
2 [Startup display]
h Select the display that appears
on the monitor when the
camera is turned on in the
recording mode.
DATE & TIME: The camera's
date and time setting is shown.
SANYO: The SANYO logo is
shown.
OFF: No startup display.
3 [Sound]
h Adjust the sounds produced
by the camera.
4 [Post view]
h Specify how long a still image
is displayed on the monitor
after it is captured.
5 [Brightness]
h Adjust the brightness of the
monitor.
6 [ language]
h Select the language in which
the monitor messages are
displayed.
7 [TV system]
h Select the type of TV signal
that is output from the
camera’s USB/AV terminal.
8 [Auto power off]
h Specify the time elapsed
before the auto power off
function operates to turn the
camera off.
9 [File no. cont'd] (page 29)
h Set the file number continued
function to ON or OFF.
: [Format] (page 31)
h Reformat the camera’s internal
memory or the card installed in
the camera.
A [Reset settings] (page 32)
h Reset the camera to the
factory-preset settings.