Sanyo MPX-MD162 - Manual (Page 46)

ALARM DATA DISPLAY
Menu 10
The alarm recordings are done according to the settings entered in the (ALARM SET), (SENSOR SET) and (VIDEO LOSS SET)
menus. Information about the alarms (alarm data) is also recorded and can be displayed on-screen.
(ALARM DATA)
Displaying the Alarm Data
1
Press the MENU button 10 times to display the (ALARM
DATA) menu.
2
Press the NEXT (or l ) button to display the next screen
of alarm data entries.
The alarm data is displayed from the most recent ones, 8
entries per screen, up to a maximum of 100 entries (13
screens).
Press the j button to display the previous screen of
alarm data entries.
3
☞ Press the EXIT button to exit the menu display.
The codes in the ITEM column indicate the type of alarm
data.
E: External alarm trigger (see page 46)
S: Video sensor trigger (see page 42, 47)
V: Video loss (see page 46)
NOTE:
• When the number of recorded alarm data entries reaches
100, the oldest ones are erased as new ones are recorded.
• The illustrated alarm data entries screens are a sample of
alarm inputs.
(ALARM DATA) 1/13
CAM DATE TIME ITEM
1 4 08-22 08:48 E
2 2 08-21 08:51 S
3 4 05-04 16:22 E
4 3 05-04 07:45 V
5 1 04-30 14:37 E
6 1 04-21 18:26 V
7 2 04-12 05:31 E
8 4 04-12 12:51 E (ALARM DATA) 2/13
CAM DATE TIME ITEM
9 4 03-29 17:40 E
10 2 03-26 08:49 V
11 4 03-13 09:25 E
12 3 03-05 08:15 S
13 1 02-29 15:18 E
14 1 02-21 12:30 V
15 2 02-11 08:21 E
16 4 01-15 11:34 E
1
NEXT
2
MENU
L8FC5/US (MPX-CD162, MD162 GB) 2000. 8. 31
English 45