Sanyo CAS-D6325 - Manual (Page 42)

E40
USING
THE ANSWERING SYSTEM
Turning Your Answering System On and Off
From the base From the handset
Turning On
When the phone is in standby, press ON/OFF.
The system announces “Answering System is
on” and plays the current greeting.
The message counter LED displays the number
of messages stored in memory. If the counter
flashes, then you have new messages waiting.
1.
2.
3.
Press MENU/SELECT.
Select the ANSW. SETUP menu, and then the
ANSWER SETUP submenu.
Move the cursor to select ON.
Press MENU/SELECT. You will hear a
confirmation tone.
1.
2.
3.
4.
Turning Off
When the phone is in standby, press ON/OFF.
The phone announces “Answering System is
off.”
The message counter LED is no longer
illuminated.
If memory is full, the message counter LED
always displays [FL].
1.
2.
3.
Press MENU/SELECT.
Select the ANSW. SETUP menu, and then the
ANSWER SETUP submenu.
Move the cursor to select OFF.
Press MENU/SELECT. You will hear a
confirmation tone.
1.
2.
3.
4.
Reviewing Messages
The message counter LED on the base displays the number of messages stored in memory. When you have new messages
(that you have not listened to yet), the message counter LED on the base and the new message LED on the handset flash.
The answering system plays your new messages first. If you have no new messages, the system plays your old messages.
You can review your messages from the base or from the handset:
UC590EH.indd E40 UC590EH.indd E40 8/19/2008 11:39:11 AM 8/19/2008 11:39:11 AM