Savin 9922DP - Manual (Page 47)

Copying
36
2
❖ Rotate Sort
❖ Shift Sort
Three sorting methods are available:
❖ Sort
Copies can be assembled as sets in
sequential order.
❖ Rotate Sort
Every other copy set is rotated by
90
°
KL and delivered to the copy
tray.
❖ Shift Sort (optional finisher or shift
sort tray required)
Every other copy set is shifted for
ease of separation. The shift tray of
the finisher or shift sort tray pro-
vides this function by sliding from
side to side.
Note
❒ To switch among Sort, Rotate Sort,
and Shift Sort modes, access the
user tools. See “6. Sort” on
⇒
P.125
“3. Input/Output 2/2” .
❒ The paper sizes that can be used
with the Rotate Sort function are as
follows:
❒ To use the Rotate Sort function,
two paper trays identical in size
and different in direction (K L)
are required.
❒ The paper sizes that can be used in
Shift Sort function are as follows:
Reference
For the paper capacity of the op-
tional finisher, see
⇒
P.38 “Staple”.
A
Press the [Sort/Staple] key.
B
Make sure that [Sort ] is se-
lected, then press the [OK] key.
C
Enter the number of copy sets
with the Number keys.
Limitation
❒ The maximum number of sets is
99.
D
Set your originals.
When setting a stack of originals
in the document feeder
A Set a stack of originals in the
document feeder, then press
the {
Start } key.
Metric version A4KLB5JISKL
Inch version 8 1 /
2
"
×
11"KL
2
1
3
2
1
3
2
1
3 2
1
3
2
1
3
3 2 1
32
1
32
1
1000-sheet finisher
A3L, B4JISL, A4KL, B5JISKL, 8 1 /
2
"
×
13"L, 11"
×
17"L, 8 1 /
2
"
×
14"L, 8 1 /
2
"
×
11"KL