Copying, Basic procedure – Savin 9922DP User Manual
Page 36
25
2. Copying
Basic Procedure
A
When the machine is set for user
codes, enter the user code with
the Number keys and then press
the {
#
} key.
Reference
See
⇒
P.48 “User Codes”.
B
Make sure that the machine is in
Copy mode.
Note
❒ If not, press the {
Copy
} key.
C
Make sure that there are no previ-
ous settings remaining.
Note
❒ To clear settings, press the
{
Clear Modes
} key.
D
Set your originals.
Reference
See
⇒
P.27 “Setting Originals”.
E
Set your desired settings.
F
Enter the number of copies re-
quired with the Number keys.
Note
❒ The maximum copy quantity
can be set between 1 and 99 (de-
fault: 99 ). See “05. Max. Copy
Q'ty” in
⇒
P.117 “1. General Fea-
tures 2/4”
.
❒ To change the number entered,
press the {
Clear/Stop
} key and
enter the new number.
G
Press the {
Start
} key.
The machine starts copying.
Note
❒ To stop the machine during the
multi-copy run, press the {
Clear/
Stop
} key.
❒ To return the machine to the ini-
tial condition after copying,
press the {
Clear Modes
} key.