StorageTek 9710 - Manual (Page 61)

MR0012J 9710 System Assurance Guide 4-21
SCSI Cabling
RS/6000, Bull DPX/20
Table 4-12. SCSI Cables and Adapters for RS/6000 and Bull DPX/20
x Description Part Number Quantity
❑ StorageTek 3 m (10 ft) cable to attach the 9710
directly to the Sun/Sparc workstation motherboard,
or to a station with IBM RISC System/6000 with
interface feature code 2420 (fast/narrow, single-
ended) 10083522 ________
❑
StorageTek 3 m (10 ft) cable to attach the 9710
directly to the Sun/Sparc workstation motherboard,
or to a station with BULL DPX/20 with fast/narrow,
single-ended feature 10083522 ________
❑ IBM 68–68-pin (RISC System/6000) Interposer
connector. This is an IBM adapter connector to
attach standard 68–68-pin SCSI cables to RISC
System/6000 with interface feature code 2416 (fast/
wide, differential). Use with one of the standard
68–68-pin cables. 50G0460 (order
from IBM) ________
❑ IBM 68–68-pin (RISC System/6000) Interposer
connector. This is an IBM adapter connector to
attach standard 68–68 pin SCSI cables to BULL
DPX/20 with fast/wide differential feature. Use
with one of the standard 68–68-pin cables. 50G0460 (order
from IBM) ________
❑
68–68-pin special SCSI cable RISC System/6000
with IBM245 differential fast/wide adapter 12 m
(40 ft). Use this cable in place of the IBM
(50G0460) interposer and standard cables above, if
a 12 m (40 ft) cable length is satisfactory. 100821105 ________