Sharp PG-M10X - Manual (Page 17)

15
Connections
Connections
Connecting video equipment
You can connect up to two pieces of video equipment to the unit following the illustrations below.
• You can switch the input source (picture) to VIDEO or S-VIDEO when you connect two pieces of equipment.
(The S-VIDEO connection provides more vivid color and higher resolution compared to the VIDEO connection.)
• You can output the sound of only one component through the unit’s speaker even when two components are connected.
When connecting two external devices, the audio from either one of these devices can be output from the speaker of this
unit. Audio can be turned on and off for video related input (video, S-video) from the menu or COMPUTER input terminal.
(see page 31)
Connection to the VIDEO input terminal of the unit
Connection to the S-VIDEO input terminal of the unit
AUDIO MOUSE COMPUTER VIDEO S-VIDEO
Rear panel terminals of this unit
Audio cable (accessory)
Audio adaptor (accessory)
Video cable (accessory)
To audio output terminals
To video output terminal
Video deck/DVD player/laser disk, etc.
(L)
White Red Yellow
(R)
AUDIO MOUSE COMPUTER VIDEO S-VIDEO
Rear panel terminals of this unit
(L)
White Red Yellow
(R)
Audio cable (accessory)
Audio adaptor (accessory)
S-video cable (accessory)
Video deck/DVD player/laser disk, etc.
To audio output terminals
To S-video output terminal